Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 3 de 3
Filter
Add filters








Main subject
Language
Year range
1.
Malaysian Journal of Microbiology ; : 113-119, 2018.
Article in English | WPRIM | ID: wpr-732359

ABSTRACT

@#Aim:This study was mainly highlighted on a combination of fungal biomass onto MWCNTs in order to enhance the positive integration of impurities removal in aqueous solution. Methodologyand results:The immobilization of fungal biomass and MWCNTs was done in a batch liquid medium with several factors such as agitation speed, dose of MWCNTs, pH and inoculum dosage that were conducted with one factor at one time (OFAT) method. Basically, to verify the functional group of MWCNTs, Aspergillusnigerbiomass and immobilized A. nigerbiomass, the FTIR was applied and FESEM was done to demonstrate andcompare the image of the immobilized A. nigerbiomass with MWCNTs and fungal biomass alone. The finding showed the best agitation speed, dose of MWCNTs, pH and inoculum dosage were 150 rpm, 0.5 g, 5-6 and 2% respectively. FTIR indicates the presents of the functional groups like –OH (3270 cm-1), C-O (1619 cm-1) and –CH (2915 cm-1) while FESEM illustrates the images of the wrapped MWCNTs on A. nigerbiomass. Conclusion, significance and impact of study:The conventional technique of adsorption of fungal biomass alone not showing a favorable removal of impurities. Thus, the immobilization of fungal biomass (A. niger) with multi-walled carbon nanotubes (MWCNTs) was a good combination since both have potential functional group to accumulate to each other and has a tendency to remove effectively and efficiently the impurities in aqueous solution.

2.
Electron. j. biotechnol ; 14(2): 3-3, Mar. 2011. ilus, tab
Article in English | LILACS | ID: lil-591933

ABSTRACT

In this study, lyophilized Trametes versicolor biomass is used as a sorbent for biosorption of a textile dye, Sirius Blue K-CFN, from an aqueous solution. The batch sorption was studied with respect to dye concentration, adsorbent dose and equilibrium time. The effect of pH and temperature on dye uptake was also investigated and kinetic parameters were determined. Optimal initial pH (3.0), equilibrium time (2 hrs), initial dye concentration ( 100 mg l-1) and biomass concentration (1.2 mg l-1) were determined at 26ºC. The maximum biosorption capacity (q max) of Sirius Blue K-CFN dye on lyophilized T. versicolor biomass is 62.62 mg/g. The kinetic and isotherm studies indicated that the biosorption process obeys to a pseudo-second order model and Langmuir isotherm model. In addition, the biosorption capacities of fungal biomass compared to other well known adsorbents such as activated carbon and Amberlite, fungal biomass biosorptions capacities were found to be more efficient.


Subject(s)
Trametes/chemistry , Biomass , Basidiomycota/chemistry , Coloring Agents , Azo Compounds/chemistry , Freeze Drying , Hydrogen-Ion Concentration , Isotherm , Kinetics , Temperature
3.
J Environ Biol ; 2010 Sept; 31(5): 561-566
Article in English | IMSEAR | ID: sea-146461

ABSTRACT

Aspergillus niger was treated with acid and immobilized in calcium alginate matrix. The dynamic removal of Cr (VI) ion was studied using continuously fed column packed with immobilized biosorbent beads. Column experiments were carried out to study the effect of various bed heights (20, 30, 40 cm) under different flow rates (5, 7.5, 10 ml min-1) on efficiency of biosorption. The maximum time (1020 minutes; 17 hr) before breakthrough point was observed in case of 40 cm bed height with flow rate of 5ml min-1. FTIR analysis of acid treated immobilized A.niger was used for a qualitative and preliminary analysis of chemical functional groups present on its cell wall which provided the information on nature of cell wall and Cr (VI) interaction during the process of biosorption. The IR spectra of biosorbent recorded before and after chromium biosorption had shown some changes in the band patterns, which were finally analyzed and was found that chemical interaction such as ion-exchange between carboxyl (-COOH), hydroxyl (-OH) and amine (-NH2) group of biosorbent and Chromium ion were mainly involved in biosorption of Cr (VI) onto A. niger cell wall surface. The biosorbed metal was eluted from biosorbent by using 0.1 M H2SO4 as eluant. Immobilized biosorbent could be reused for, five consecutive biosorption and desorption cycles without apparent loss of efficiency after its reconditioning. Considering all above factors together this paper discusses the efficient chromium biosorption process carried out by immobilized A. niger biosorbent.

SELECTION OF CITATIONS
SEARCH DETAIL